Product Description
The conveyor cleaner is a device used to clean the conveyor belt. During the process of conveying materials on a belt conveyor, if residual attached materials enter the roller or roller bearing seat, it will accelerate bearing wear, and if materials stick to the surface of the roller or roller, it will tear and roughen the conveyor belt surface, accelerating the wear and damage of the conveyor belt.
The V-Plow belt cleaner is used for material cleaning of the return belt or the lower belt of the unloading pulley. For the cleaning effect of the conveyor belt with uneven surface is better. Generally it is welded to the middle frame in front of the tensioning drum of the tail drum and the vertical tensioning device, and the length of the lifting chain is adjusted properly.
|
Item |
Data |
Item |
Data |
|
Belt width. mm |
1400 |
Belt Speed. m/s |
3 ~ 5 |
|
Working temperature |
< 80 C |
Breaking Elongation. % |
> 300 |
|
Abrasion Loss. cm3/1.6 km |
0.019 ~ .571 |
Elastic resistance. % |
34 |
|
Elongation. % |
> 300 |
Clean Efficiency. % |
90 ~ 93 |
|
Tensile strength. MPA |
30 ~ 53 |
Density |
1.12 ~ 1.25 |
|
Tear strength. Kn / m |
70 |
Hardness. Shore A |
85 |
|
Compressive strength. MPA |
6 ~ 10.5 |
Fiction Coefficient |
0.12 ~ 0.15 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Service |
|---|---|
| Warranty: | 1 Year |
| Structure: | Conveyor System |
| Material: | Polyester |
| Material Feature: | Oil Resistant, Heat Resistant, Fire Resistant |
| Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
| Customization: |
Available
| Customized Request |
|---|
How do you calculate the power rating and speed capacity of a V-belt system?
Calculating the power rating and speed capacity of a V-belt system involves considering various factors such as belt type, pulley dimensions, belt tension, and speed. Here’s a general overview of the calculations involved:
- Power Rating Calculation:
- Speed Capacity Calculation:
To calculate the power rating of a V-belt system, you need to determine the maximum power that the belt can transmit without slipping or experiencing excessive wear. The power rating is typically expressed in horsepower (HP) or kilowatts (kW).
The formula for calculating the power rating is:
Power (HP or kW) = (Tension in belt (lb or N) * Belt speed (ft/min or m/s)) / 33,000 (for HP) or 1,000 (for kW)
The tension in the belt can be determined based on the design requirements of the system and is influenced by factors such as the type of application and the desired safety factor.
The speed capacity of a V-belt system is the maximum rotational speed at which the belt can operate without experiencing excessive vibration or failure. It is typically expressed in revolutions per minute (RPM).
The formula for calculating the speed capacity is:
Speed (RPM) = (Belt pitch diameter (in or mm) * π * Belt speed (ft/min or m/s)) / 12 (for in) or 1000 (for mm)
The belt pitch diameter is determined based on the pulley dimensions and is the effective diameter at which the belt engages with the pulley.
It’s important to note that these calculations provide general guidelines, and actual power rating and speed capacity may vary depending on the specific belt and pulley design, as well as other factors such as belt tensioning, environmental conditions, and system efficiency. It is recommended to consult the belt manufacturer’s guidelines or seek assistance from an engineer experienced in power transmission systems to ensure accurate calculations and appropriate belt selection for a given application.
What are the factors that affect the lifespan and efficiency of V-belts?
The lifespan and efficiency of V-belts can be influenced by several factors. Here are the key factors that can affect the performance of V-belts:
- Belt Tension:
- Belt Alignment:
- Belt Condition:
- Maintenance and Lubrication:
- Operating Conditions:
- Load and Application:
Proper belt tension is crucial for the longevity and efficiency of V-belts. Insufficient tension can cause slippage, while excessive tension can lead to excessive load on the belt and other components. It is important to follow the manufacturer’s recommendations for the correct tension range.
Poor belt alignment can cause uneven wear, increased friction, and reduced efficiency. Misaligned pulleys can cause the belt to run at an angle, resulting in premature wear and potential failure. Regularly check and adjust the alignment of pulleys to ensure proper belt tracking.
The condition of the V-belt itself is a significant factor in its lifespan and efficiency. Regularly inspect the belt for signs of wear, cracks, fraying, or glazing. Replace worn-out or damaged belts promptly to avoid further issues.
Proper maintenance and lubrication can significantly extend the lifespan of V-belts. Adequate lubrication reduces friction and heat buildup, which helps to prevent premature wear and cracking. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant.
Operating conditions, such as temperature, humidity, and exposure to chemicals or contaminants, can affect the performance of V-belts. Extreme temperatures can cause the belt material to deteriorate, while exposure to chemicals or contaminants can lead to belt degradation. Ensure that the operating conditions are within the recommended range for the specific V-belt.
The load and application requirements also impact the lifespan and efficiency of V-belts. Excessive loads or improper application can cause excessive stress on the belt, leading to premature failure. Ensure that the V-belt is appropriately sized and rated for the specific load and application.
By considering these factors and implementing proper maintenance practices, such as regular inspections, correct tensioning, alignment checks, and appropriate lubrication, you can maximize the lifespan and efficiency of V-belts in your applications.
What are the signs of a worn or damaged V-belt that needs replacement?
A worn or damaged V-belt can lead to decreased performance, increased energy consumption, and potential equipment failure. Recognizing the signs of a worn or damaged V-belt is important for timely replacement and preventing further damage. Here are some common signs to look out for:
- Visible wear: Inspect the V-belt for visible signs of wear, such as fraying, cracking, or glazing. Excessive wear indicates that the belt has reached the end of its service life and should be replaced.
- Chunking or missing pieces: If the V-belt shows signs of chunking or has missing pieces, it is a clear indication of severe damage. This can occur due to excessive tension, overloading, or prolonged use beyond the belt’s capacity.
- Excessive noise: A worn or damaged V-belt may produce noticeable noise during operation. This can be in the form of squealing, screeching, or rumbling sounds. The noise is often caused by slipping, misalignment, or belt degradation.
- Slippage: If the V-belt slips on the pulleys, resulting in reduced power transmission or inconsistent operation, it indicates a problem. Slippage can occur due to incorrect tension, pulley misalignment, or insufficient grip caused by belt wear.
- High heat or burning smell: Excessive heat generated by a V-belt can indicate friction caused by belt slippage or misalignment. If you notice a burning smell or feel excessive heat near the belt drive system, it is a sign of potential belt damage.
- Loss of tension: If the V-belt consistently loses tension and requires frequent readjustment, it indicates wear or elongation. Over time, the belt may stretch and lose its original tension, resulting in reduced power transmission efficiency.
- Reduced power transmission: A worn or damaged V-belt may struggle to transmit the required power, leading to decreased equipment performance. This can result in slower operation, reduced torque, or inability to handle the load.
- Visible cracks or separation: Cracks or separation in the V-belt’s rubber material are clear signs of damage. These can occur due to age, exposure to harsh environments, or chemical degradation. Cracked or separated belts should be replaced immediately.
- Shortened belt life: If a V-belt consistently fails or requires replacement sooner than its expected service life, it indicates a problem. Factors such as incorrect tensioning, misalignment, or excessive load can contribute to premature belt failure.
If you observe any of these signs in a V-belt, it is recommended to replace the belt promptly. Continuing to use a worn or damaged V-belt can lead to further damage, increased downtime, and potential equipment failure. Regular maintenance and inspections are essential for identifying and addressing these signs early, ensuring the reliability and longevity of the V-belt system.
editor by CX 2024-05-02
by
Leave a Reply