Silent chain

The Ever-power3/16″ pitch silent chain drive is a high speed power transmission medium that offers the maximum in performance and reliability. Quietness and durability are the result of unique design and manufacturing practices. Components are the finest alloy steels, correctly temperature treated to resist wear and fatigue. Chain link and sprocket profiles are relative to practices established by the chain market. Morse 3/16″ chain is available in noncorrosive types of components. Morse 3/16″ pitch Silent Chain is produced in three fundamental types of assembly to provide complete coverage for all drive requirements. Eight standard widths handle load ranges and speeds with economy and long chain life. Becoming a member of pin Insertion of the pin and cotter allows simple field assembly of the chain. Connecting hyperlink The connecting link can be used when chain is cut and assembled in the field. The connecting link includes 1 pin hyperlink, inside link, 1 connector plate and 2 cotter pins. Note: Use even quantity of pitches in chain. Offset or hunting links unavailable. • For standard drives, side guide chain is recommended for all chains up to 15/32″ wide (SCO315). • For regular drives, center information is recommended for all chains 19/32″ (SCO319) and wider. • For serpentine drives, reversing secondary shaft rotation, or if adjustable idler {is required|is necessary

Ever-power Silent Chain is an Inverted Tooth type drive providing particularly smooth, quiet power transmission at higher speeds up to 5000 FPM. The distinctive Morse Rocker Joint eliminates friction during chain articulation-permitting high rotative speed with less wear and heat. All the silent chains and sprockets outlined are to the ANSI regular profile. Chain designation detailed as example SC 408, indicating: S.C.-Silent Chain standard link profile and guide 4-Pitch in 1/8″ increments 08-Width in 1/4″ increments All sizes of chain and sprockets listed are of the guts Guideline type except SC302. Standards aren’t such that competitive chains could be connected together. They will, however, individually run over the same set of regular sprockets. Sprocket designation outlined, for example, 408-38: 4-Pitch in 1/8″ increments 08-Width in 1/4″ increments 38-Number of teeth offset link section Changes of centers and a straight quantity of pitches in the chain duration are desirable characteristics for all chain drives. Centers should be selected which lead to an even quantity of pitches in the chain duration. When fixed centers necessitate the usage of an odd quantity of pitches an offset hyperlink or hunting link may be used. As illustrated, this assembly, four pitches lengthy, contains one row of offset links.

features • 99% Efficient Drives • Economical • Simple Installation • EXTENDED LIFE • Space Saver • Reduced Bearing Loads • Even Drive • Quiet Drive • Great Drive • Not Affected by Atmospheric Circumstances • Adaptable to Your Centers • High Speeds • Minimum of Maintenance • Adaptable to Rate Changes • Positive Drive-No Slide • Wide Acceleration and H.P. Range