Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as for example block and tackle systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal, nylon, and aluminium are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Styles C, D, and J possess a bracket on underneath for tying off 1 end of a rope.
Style K decrease the force needed to hold your load in place. Unlike regular pulleys, these have a V-groove for more hold on your rope, plus they ratchet when under load so they don’t slip in the various other direction. Pulley for3/8″ dia. rope could be arranged to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Mount these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Aluminium and nylon are lightweight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Acetal and aluminium are light-weight and corrosion resistant. Galvanized metal is certainly more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel can be more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a set surface to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys meant for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about 50 % the pressure of a single-groove pulley to go the same load. They possess a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum is certainly corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang 
as part of your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open therefore it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to install these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as for example block and tackle systems.They are able to reduce the force had a need to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
Hanging Pulleys designed for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style E pulleys have bracket upon the bottom that enables you to tie off 1 end of your wire rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a totally free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the push of a single-groove pulley to go the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Design C to keep rope secure.
Warning: Never use to lift people or products over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as block and deal with systems. They can reduce the force needed to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style A pulleys have a bracket on the bottom for tying off one end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end is not needed.
Warning: Never use to lift people or products over people.