Many “gears” are used for automobiles, but they are also used for many additional machines. The most frequent one is the “transmitting” that conveys the power of engine to tires. There are broadly two roles the transmission of a car plays : one is definitely to decelerate the high rotation rate emitted by the engine to transmit to tires; the various other is to change the reduction ratio in accordance with the acceleration / deceleration or generating speed of a car.
The rotation speed of an automobile’s engine in the general state of traveling amounts to 1 1,000 – 4,000 rotations per minute (17 – 67 per second). Because it is extremely hard to rotate tires with the same rotation speed to perform, it is required to lessen the rotation speed utilizing the ratio of the number of gear teeth. This kind of a role is called deceleration; the ratio of the rotation acceleration of engine and that of tires is named the reduction ratio.
Then, why is it necessary to alter the reduction ratio relative to the acceleration / deceleration or driving speed ? The reason being substances require a large force to begin moving however they do not require such a huge force to excersice once they have began to move. Automobile can be cited as an example. An engine, however, by its character can’t so finely change its output. As a result, one adjusts its result by changing the reduction ratio utilizing a transmission.
The transmission of motive power through gears very much resembles the principle of leverage (a lever). The ratio of the amount of tooth of gears meshing with one another can be considered as the ratio of the distance of levers’ arms. That is, if the decrease ratio is huge and the rotation quickness as planetary gear reduction output is low in comparison to that as insight, the energy output by tranny (torque) will be large; if the rotation quickness as output isn’t so low in comparison to that as insight, on the other hand, the energy output by transmitting (torque) will be little. Thus, to improve the decrease ratio utilizing transmitting is much comparable to the theory of moving things.
Then, how does a transmitting change the reduction ratio ? The answer lies in the system called a planetary gear mechanism.
A planetary gear system is a gear mechanism comprising 4 components, namely, sunlight gear A, several world gears B, internal equipment C and carrier D that connects world gears as observed in the graph below. It includes a very complex structure rendering its style or production most difficult; it can realize the high reduction ratio through gears, however, it really is a mechanism suitable for a reduction mechanism that requires both small size and high performance such as for example transmission for automobiles.
In a planetary gearbox, many teeth are engaged at once, which allows high speed reduction to be performed with relatively small gears and lower inertia reflected back to the engine. Having multiple teeth discuss the load also allows planetary gears to transmit high degrees of torque. The mixture of compact size, huge speed decrease and high torque transmitting makes planetary gearboxes a favorite choice for space-constrained applications.
But planetary gearboxes perform have some disadvantages. Their complexity in style and manufacturing can make them a far more expensive alternative than various other gearbox types. And precision production is extremely important for these gearboxes. If one planetary equipment is positioned closer to the sun gear than the others, imbalances in the planetary gears may appear, leading to premature wear and failure. Also, the small footprint of planetary gears makes heat dissipation more difficult, so applications that operate at high speed or encounter continuous operation may require cooling.
When utilizing a “standard” (i.e. inline) planetary gearbox, the motor and the powered equipment should be inline with one another, although manufacturers provide right-angle designs that include other gear sets (frequently bevel gears with helical teeth) to supply an offset between your input and output.
Input power (max)27 kW (36 hp)
Input speed (max)2800 rpm2
Output torque (intermittent)12,880 Nm(9,500 lb-ft)
Output torque (continuous)8,135 Nm (6,000 lb-ft)
1 Actual ratio would depend on the drive configuration.
2 Max input speed related to ratio and max output speed
3 Max radial load positioned at optimum load position
4 Weight varies with configuration and ratio selected
5 Requires tapered roller planet bearings (unavailable with all ratios)
Approximate dry weight100 -181 kg (220 – 400 lb)4
Radial load (max)14,287kg (31,500 lb)3
Drive typeSpeed reducer
Hydraulic engine input SAE C or D hydraulic
Precision Planetary Reducers
This standard selection of Precision Planetary Reducers are perfect for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing limited integration of the electric motor to the unit. Style features include installation any servo motors, standard low backlash, high torsional stiffness, 95 to 97% efficiency and calm running.
They are available in nine sizes with reduction ratios from 3:1 to 600:1 and result torque capacities up to 16,227 lb.ft. The output could be provided with a solid shaft or ISO 9409-1 flange, for mounting to rotary or indexing tables, pinion gears, pulleys or other drive elements without the need for a coupling. For high precision applications, backlash levels down to 1 arc-minute are available. Right-angle and insight shaft versions of these reducers are also obtainable.
Usual applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
Unit Design &
Construction
Gearing: Featuring case-hardened & ground gearing with minimal put on, low backlash and low sound, making them the many accurate and efficient planetaries obtainable. Standard planetary design has three planet gears, with an increased torque version using four planets also available, please see the Reducers with Result Flange chart on the Unit Ratings tab under the “+” unit sizes.
Bearings: Optional output bearing configurations for app specific radial load, axial load and tilting second reinforcement. Oversized tapered roller bearings are regular for the ISO Flanged Reducers.
Housing: Single piece steel housing with integral band gear provides greater concentricity and remove speed fluctuations. The housing can be installed with a ventilation module to increase input speeds and lower operational temperatures.
Output: Available in a solid shaft with optional keyway or an ISO 9409-1 flanged interface. You can expect an array of standard pinions to install right to the output design of your choice.
Unit Selection
These reducers are usually selected based on the peak cycle forces, which usually happen during accelerations and decelerations. These routine forces rely on the powered load, the velocity vs. time profile for the routine, and any other exterior forces acting on the axis.
For application & selection assistance, please call, fax or email us. The application details will be examined by our engineers, who’ll recommend the best solution for the application.
Ever-Power Automation’s Gearbox products offer high precision in affordable prices! The Planetary Gearbox item offering includes both In-Line and Right-Angle configurations, built with the design goal of supplying a cost-effective gearbox, without sacrificing quality. These Planetary Gearboxes are available in sizes from 40mm to 180mm, ideal for motors ranging from NEMA 17 to NEMA 42 and bigger. The Spur Gearbox range offers an efficient, cost-effective choice compatible with Ever-Power Automation’s AC Induction Gear Motors. Ever-Power Automation’s Gearboxes are offered in up to 30 different equipment ratios, with torque ratings up to 10,488 in-lbs (167,808 oz-in), and so are compatible with most Servo,
SureGear Planetary Gearboxes for Small Ever-Power Motors
The SureGear PGCN series is a good gearbox value for servo, stepper, and other movement control applications requiring a NEMA size input/output interface. It includes the best quality designed for the price point.
Features
Wide range of ratios (5, 10, 25, 50, and 100:1)
Low backlash of 30 arc-min or less
20,000 hour service life
Maintenance free; requires no additional lubrication
NEMA sizes 17, 23, and 34
Includes hardware for installation to SureStep stepper motors
Optional shaft bushings designed for mounting to other motors
1-year warranty
Applications
Material handling
Pick and place
Automation
Packaging
Other motion control applications requiring a Ever-Power input/output
Spur gears certainly are a type of cylindrical equipment, with shafts that are parallel and coplanar, and 
tooth that are straight and oriented parallel to the shafts. They’re arguably the simplest and most common kind of gear – easy to manufacture and ideal for an array of applications.
One’s the teeth of a spur gear have got an involute profile and mesh one particular tooth simultaneously. The involute type means that spur gears simply generate radial forces (no axial forces), nevertheless the approach to tooth meshing causes high pressure on the gear one’s teeth and high sound creation. Because of this, spur gears are usually utilized for lower swiftness applications, although they can be utilized at almost every speed.
An involute equipment tooth carries a profile this is actually the involute of a circle, which implies that since two gears mesh, they get in touch with at an individual point where the involutes fulfill. This aspect motions along the tooth areas as the gears rotate, and the kind of force ( known as the line of actions ) is definitely tangent to both foundation circles. Therefore, the gears stick to the fundamental regulation of gearing, which promises that the ratio of the gears’ angular velocities must stay continuous through the entire mesh.
Spur gears could possibly be produced from metals such as for example steel or brass, or from plastics such as nylon or polycarbonate. Gears manufactured from plastic produce less audio, but at the trouble of power and loading capability. Unlike other devices types, spur gears don’t encounter high losses due to slippage, therefore they often times have high transmission efficiency. Multiple spur gears can be employed in series ( known as a gear teach ) to achieve large reduction ratios.
There are two primary types of spur gears: external and internal. Exterior gears have the teeth that are cut externally surface of the cylinder. Two external gears mesh with one another and rotate in opposite directions. Internal gears, on the other hand, have the teeth that are cut inside surface area of the cylinder. An exterior gear sits in the internal equipment, and the gears rotate in the same direction. Because the shafts sit closer together, internal gear assemblies are more compact than external gear assemblies. Internal gears are primarily used for planetary equipment drives.
Spur gears are usually seen as best for applications that require speed reduction and torque multiplication, such as for example ball mills and crushing gear. Examples of high- velocity applications that use spur gears – despite their high noise amounts – include consumer appliances such as washing machines and blenders. Even though noise limits the utilization of spur gears in passenger automobiles, they are often found in aircraft engines, trains, and even bicycles.