low backlash worm drive

This standard range of Servo-Worm Reducers are perfect for use in applications that demand powerful, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo motor technology, providing tight integration of the electric motor to the machine. Angular backlash of less than 1 arc-moments is provided standard.

They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of engine couplings and installation flanges are available for assembly to practically all servo motors, and the hollow bore result can be used to mount output shafts, pinion shafts, or other drive elements.

Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable set up space.

The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you with excellent attenuation properties for the procedure of your systems with low degrees of vibration. This is usually because of the longitudinal application of force on the insight shaft. This enables torque impulses to be prevented efficiently and for maximum results when it comes to running smoothness and noise reduction to be achieved.

Both the gear unit, and the synchronous servomotor are based on our modular system. This enables you to have completely individual configuration opportunities for every application. One matter is certain – Our servo gearmotors are genuine specialists for very particular requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement when a equipment in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are metal or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are low backlash worm drive considerably smaller than other gear reduction boxes. A main benefit of worm equipment reducers is that they generate an output that’s 90° from the input and can be used to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox offers right hand threads; to improve the path of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability could be limited to the point where it requires gearing. As servo producers develop more powerful motors that can muscle mass applications through more complicated moves and produce higher torques and speeds, these motors require gearheads add up to the task.