Drive shaft

Drive shaft
Ever-Power offers telescopic drive shafts in a number of design types, such as for example Heavy Duty, Stainless Steel and Leveler Strength.

Drive shafts, also called articulated shafts, happen to be shafts that include two universal joints. The simplest type of drive shaft has a joint at each end. The configuration is essentially an extended dual joint for overcoming distances and offsets between the drive and the influenced load. Drive shafts provide a remedy for bridging angular misalignment.
Telescopic Drive Shafts
Drive shafts can contain a telescopic middle component that pto shaft permits quicker and simpler repositioning than feasible with a rigid two-joint shaft. They enable easy length adjustment in axial misalignments.
Spring-Loaded, Quick-Change Shafts for Reducing Downtime
Spring-loaded drive shafts contain two back-to-back single universal joints connected with a spring-loaded intermediate shaft. It allows the travel shaft to always be quickly removed and replaced without tools. Pinning of external yokes is not required because the spring pressure on the intermediate shafts keeps the quick-switch universal joint secure at each end.
Fail-Safe Stop Solution
Spring-loaded drive shafts can be customized to include a fail-secure solution. If the application form seriously exceeds the joint’s ranked torque capability, the drive shaft could be designed to fail and stop in a safe vogue, without damaging the electric motor.
We uses the very best products and supplies to meet all agricultural drive shaft needs. Drive Shafts, Inc. also carries an extensive line of plastic-type material driveline shielding from World Shield.
PTO belt driven centrifugal pumps were initially introduced in 1964 and enabled the applicator to mount centrifugal pumps on 540 RPM and 1000 RPM tractor PTO shafts. The simple, yet durable design of the PTOC pump offers withstood the test of time even though many attempts at imitation attended and gone.

The key to success of the belt driven pump has been the Early spring Loaded Idler. The idler maintains proper belt pressure which minimizes the load on the pump bearings. More importantly, the idler allows absorb the shock of PTO engagement that may destroy cog belts or gears.

Unit PTOC belt driven pumps are easy to operate and maintain. Belts can be replaced in the discipline with minimum downtime and at minor cost. Maintenance features likewise incorporate sealed ball bearings and a readily replaceable mechanical seal. The belt guard provides complete insurance of the pulleys, shaft and belt. All PTO powered pumps are equipped with a stainless shaft and wear band for excellent corrosion resistance.
We just need to know what series you want, the yoke you want on each end, what length you want the driveshaft overall compressed, and we’ll take health care of the rest.