Worm Gear Swiftness Reducers: Double Reduction
Ever-Power. manufacturers double lowering Worm Gear reducers that are designed to last. Double decrease units are created with the same top quality components as the single decrease Worm Gear reducers.
Double Decrease Worm Gear Quickness Reducer Features
High Reduction: 75:1 – 3600:1 and higher
C-face input or sound shaft input
Mix of two single reduction reducers
Solid or hollow end result shafts available
Several styles of bolt-on bases available
Excessive tensile strength cast bronze worm wheel and a hardened and ground alloy steel worm made integral with the shaft for lengthy and trouble-free life
All cast iron construction
9 Products: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Decrease Worm Gear Speed Reducer Applications
Shipping & Delivery
Standard shipping: 3-4 days
Same/next day delivery on stock items at no additional
Twice reduction gearing mechanism is used in enormous machinery and automotives where in the speed should be decreased at a necessary level. For eg if the input speed is usually 2000rpm and the output rate desired is normally 300rpm a reduction gearing system is used for instance a reduction gear package. Yet, in case of double reduction mechanism, the reduced amount of speed occurs in 2 steps. Primarily the source from the engine shaft includes a pinion mounted on it through couplings. This pinion gear is then connected to an intermediate gear which is first reduction gear. This equipment is then connected to some other low quickness pinion on another shaft. This low velocity pinion is connected to the second reduction equipment which is installed on the propeller shaft which is the output.
Greaves Double Reduction Rate Reducers are two stage worm reduction units. A especially designed primary worm lowering unit is integrally installed on a standard single reduction Greaves worm reducer which forms the second stage. The composite units provide the most small and rigid set up for large reduced amount of speed necessary for sluggish going machinery. A wide selection of ratios upto 4900:1 is available.
The wormshafts are constructed of high quality case hardening steeL accurately double reduction gear reducer generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of substantive sections welded to rigid centres. Considerable versatility of shaft layout is normally permissible with all sorts of Double Reduction units
Ever-Power Double Reduction Worm Gearboxes are two level worm reduction units.
A specifically designed primary worm reduction product is integrally mounted on a standard single decrease AGNEE worm gearbox which forms the second stage. The composite units provide the most small and rigid set up for large reduction of speed necessary for slower going machinery. A wide range of ratios up to 4900:1 is offered.
Double Reduction Worm Gear Field Sizes Available around are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical selection of commonly used ratios from the entire range of Ever-Power Double Reduction Worm Gear Box. Details of other ratios on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Version / Shaft Mounted Version / All sorts with motor installation adaptor /
motor – optional
The worm shafts are created from top quality case hardening steel, accurately generated, ground and super finished. The worm tires comprise of phosphor bronze centrifugally cast rims of significant sections welded to rigid centers. Considerable versatility of shaft layout is certainly permissible with all sorts of Double Reduction systems.
The products are widely applied in the making equipments of all sorts of industries domestic and overseas. They will be the best alternatives for nowadays modern features of mechanical reducing drive control to understand large twisting distance, huge gear ratio, low noise, high performance and low temperature.
Customized high quality double worm gear quickness reducer aluminium gearbox reduction gearbox with electric motor
Blue, Silver Or seeing that customer’s requirements
low noise (<50DB)
Huge Efficience and low noise and low temperature
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, area harness is 56-62HRC
Carton and Wooden Case
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Synthetic & Mineral
Worm Gear Swiftness Reducers: Double Reduction