Precautions for storage, installation and use of D-XL rubber double-sided toothed synchronous belt

1. It is strictly prohibited to excessively break or bend the D-XL rubber double-sided toothed synchronous belt to avoid damage to the strong layer and lose its use value.

2. Do not store the D-XL rubber double-sided toothed synchronous belt in an abnormal bending state for a long time.

3. Keep the D-XL rubber double-sided toothed synchronous belt in a cool place.

4. When installing, please shorten the center distance, loosen the tension pulley, and do not force the belt from the lower flange of the pulley to drag and grind into it.

5. The teeth of the D-XL rubber double-sided toothed synchronous belt must be at right angles to the running direction of the synchronous belt wheel.

6. The parallelism of the main shaft of the driving wheel and the driven wheel is controlled at about tangent = 1/1000.Inaccurate shaft position directly affects the service life.

7. It is found that the D-XL rubber double-sided toothed synchronous belt on the driving wheel is offset to one side, and the driven wheel should be moved to adjust, and the pressure of the tensioning wheel should be adjusted.

8. When starting, the center distance changes, the D-XL rubber double-sided toothed synchronous belt is loose, and the phenomenon of tooth skipping occurs. Check whether the pulley frame is loose and whether the shaft positioning is inaccurate.To be adjusted and reinforced.

9. D-XL rubber double-sided toothed synchronous belts must be properly tensioned according to different models and bandwidths when installing.

10. The tensioning wheel must be installed on the loose side of the driven transmission.

The characteristics of D-XL rubber double-sided tooth synchronous belt transmission

D-XL rubber double-sided toothed synchronous belt is mainly used for double-sided transmission, with the characteristics of synchronization, simultaneous and double efficiency.It shows its excellence when it requires a belt to drive and the direction is opposite, the installation location is particularly compact, or in other fields with high transmission requirements such as the main drive and auxiliary drive linkage; D-XL rubber double-sided toothed synchronous belts Lightweight structure, non-slip meshing transmission, low noise and other characteristics are recognized, recognized and widely used by the majority of machinery, textiles, precision instruments, petrochemicals, communication cables and other industries.