Design parameters of AT5 rubber single tooth synchronous belt:

The tooth profile is a metric trapezoidal tooth, also known as a special square tooth, which is a light transmission design.

Standard design reference value: pitch: 5mm; tooth height: 1.2mm; belt thickness: 2.7mm; angle: 50 degrees

AT5 rubber single tooth synchronous belt general specifications

(5) ATXNUMX rubber single tooth timing belt raw materials: glass fiber reinforced polyester material, neoprene rubber, nylon high elastic cloth

(5) AT60 rubber single tooth timing belt load capacity: 343n/mm (XNUMXlbf/in)

(5) Breaking strength of AT80 rubber single tooth synchronous belt: >=457n/mm(XNUMXlbf/in)

(5) AT40 rubber single tooth synchronous belt operating temperature range: -120 degrees-XNUMX degrees

Tooth profile pitch of AT5 rubber single tooth synchronous belt:

6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 50mm

AT5 rubber single tooth synchronous belt width can be customized according to customer requirements

Features of AT5 rubber single tooth synchronous belt:

AT5 rubber single-tooth timing belts are specially used for long-lasting and energy-efficient power transmission and linear transmission operations.They are mainly used for endless and open action, various sizes, structures and toothed designs to handle a wide range of loads. AT5 rubber single tooth timing belt polyurethane is very wear-resistant, anti-fatigue, and very flexible at the same time.Product quality can be seen through many details.The tolerance is tight and accurate, and the perfect tooth meshing is achieved.

AT5 rubber single tooth synchronous belt identification:

Three parts: indicates the length, spacing and width of the belt to bring back the part number.As shown below.This AT5 rubber single-sided tooth synchronous belt model has a pitch line length of 450mm and a width of 10mm.