Rubber single tooth synchronous belt
Rubber single tooth synchronous belt
T20 rubber single tooth synchronous belt
Cixi XINLAN Synchronous Belt Co., Ltd.
Production materials: Glass fiber, neoprene rubber, nylon high stretch cloth
Processing Equipment: Steam cylinder mould
Delivery cycle: 1~3 days
Application areas: Textiles, machine tools, tobacco, communication cables, light industry, chemicals, metallurgy, instrumentation, food, mining, petroleum, automobiles, etc.
T20 rubber single-sided synchronous gears have a trapezoidal pitch of 20mm.They are used in large and heavy drives. The T20 rubber single-sided toothed synchronous belt adopts imported glass fiber cord, which can provide correct installation and tension, reduce belt maintenance and prolong the service life of the belt, and also increase stability and flexibility.
Tooth profile pitch of T20 rubber single tooth synchronous belt:
25mm, 32mm, 50mm, 75mm, 100mm
The width of T20 rubber single tooth synchronous belt can be made according to customer requirements.
T20 rubber single tooth synchronous belt design features and advantages:
The T20 rubber single-sided toothed synchronous belt is flexibly connected to the motor and the motor, and has the following functions during movement:
1. The T20 rubber single tooth synchronous belt runs stably, avoiding the slip of the vibration belt.
2. T20 rubber single-sided tooth synchronous belts have higher mechanical efficiency: effectively reduce friction and temperature, thereby increasing the use time of the belt.
3. T20 rubber single tooth synchronous belt has strong load capacity
4. T20 rubber single-sided tooth timing belt is noise-free and does not require maintenance
5. T20 rubber single-sided tooth timing belt is resistant to ozone and ultraviolet rays.
6. T20 rubber single-sided tooth timing belt has a good prediction of resistance to oil, grease and gasoline.
7. T20 rubber single-sided tooth synchronous belts are acid-resistant and cleaning products according to special conditions.
T20 rubber single tooth synchronous belt identification:
Three parts: Indicate the length, spacing and width of the belt to bring back the part number.As shown below.This T20 rubber single tooth synchronous belt model has a pitch line of 2200mm and a width of 75mm.
| specification | Knot line length | Number of teeth |
| T20×1220 | 1220.00 | 61 |
| T20×1240 | 1240.00 | 62 |
| T20×1260 | 1260.00 | 63 |
| T20×1280 | 1280.00 | 64 |
| T20×1320 | 1320.00 | 66 |
| T20×1460 | 1460.00 | 73 |
| T20×1680 | 1680.00 | 84 |
| T20×1700 | 1700.00 | 85 |
| T20×1760 | 1760.00 | 88 |
| T20×1780 | 1780.00 | 89 |
| T20×1880 | 1880.00 | 94 |
| T20×2200 | 2200.00 | 110 |
| T20×2240 | 2240.00 | 112 |
| T20×2600 | 2600.00 | 130 |
| T20×2720 | 2720.00 | 136 |
| T20×2760 | 2760.00 | 138 |
| T20×3100 | 3100.00 | 155 |
| T20×3620 | 3620.00 | 181 |
| T20×4760 | 4760.00 | 238 |
