S5M rubber single-sided tooth timing belt has a curved tooth pitch of 5mm, and S5M rubber single-sided tooth timing belt is mainly used in small and medium-sized drives. The tooth profile design of S5M rubber single-tooth synchronous belt has a better transmission curve than the traditional 5M rubber single-tooth synchronous belt.In this way, the force is evenly distributed to each belt tooth, which improves the load capacity, reduces the wear of the belt teeth, eliminates noise, and makes the S5M rubber single-tooth synchronous belt have a longer service life.

Advantages of S5M rubber single tooth synchronous belt:

1. S5M rubber single tooth synchronous belt has large load capacity.

2. S5M rubber single tooth synchronous belt has no delay.The teeth of the timing belt gear mesh to reduce speed changes.Continuous speed

3. S5M rubber single tooth synchronous belt has no lubrication need, no need to adjust due to stretching and wear.

4. S5M rubber single tooth synchronous belt has high mechanical efficiency.The belt reduces heat build-up and does not need to transmit load due to friction.

5. S5M rubber single tooth synchronous belt has a long-term trouble-free service life.

Design features of S5M rubber single tooth synchronous belt:

S5M rubber single-sided tooth timing belt polyurethane is very wear-resistant, anti-fatigue, and very flexible at the same time.Product quality can be seen through many details.The tolerance is tight and accurate, and the perfect tooth meshing is achieved.

S5M rubber single tooth synchronous belt identification:

Three parts: indicates the length, spacing and width of the belt to bring back the part number.As shown below.This S5M rubber single tooth synchronous belt model has a pitch line length of 500mm and a width of 20mm.