Design parameters of XL rubber single tooth synchronous belt:

The tooth profile is an inch trapezoidal tooth, also known as a square tooth, which belongs to the ultra-light transmission design.

Standard design reference value: pitch: 5.080mm; tooth height: 1.27mm; belt thickness: 2.30mm; angle: 50 degrees

Design features of XL rubber single tooth synchronous belt:

XL rubber single tooth timing belt adopts imported high-quality glass fiber cord and molded cut, which reduces the maintenance of the timing belt and prolongs the service life of the belt. It also increases the stability and flexibility.The bottom surface pattern on the variable slotted belt improves flexibility, reduces noise, and allows tighter bends for compact, heavy-duty engines with smaller diameters to find the pulley radius.The molding gap also contains air and heat dissipation, which makes the timing belt to increase the cooling of the code belt, which reduces the wear and deterioration caused by higher temperatures.

Advantages of XL rubber single tooth synchronous belt:

1. XL rubber single-sided tooth synchronous belt adopts imported high-quality synthetic neoprene as the main raw material, which has good flexibility, which makes the synchronous belt more flexible, but also gives the pulley lateral stability.

2. The thermally active tensile glass fiber rope performance provides correct installation and tension.

3. Accurately match with the width of the top of the side wall, and the belt pulley is smoother and more controlled by the belt size.

XL rubber single tooth synchronous belt identification:

Three parts: indicates the length, spacing and width of the belt to bring back the part number.As shown below.This XL rubber single tooth synchronous belt model has a pitch line length of 20 inches (508.00mm) and a width of 0.37 inches (9.4mm).