Rubber double-sided toothed synchronous belt
Rubber double-sided toothed synchronous belt
D-T10 rubber double-sided tooth synchronous belt
Cixi XINLAN Synchronous Belt Co., Ltd.
Production materials: Rubber, glass fiber thread, nylon high stretch cloth
Processing Equipment: Steam cylinder mould, mould pressing
Delivery cycle: 1~5 days
Application areas: Machinery, textiles, precision instruments, petrochemicals, communication cables, etc.
Brief introduction of D-T10 rubber double-sided tooth synchronous belt
1. The pitch and tooth profile parameters of D-T10 rubber double-sided tooth synchronization are equivalent to those of T10 rubber single-sided tooth synchronous belts.
2. The D-T10 rubber double-sided synchronous gear can be divided into two standard types according to the distribution of the tooth shape: the tooth profile is arranged in a symmetrical manner is the DA type D-T10 rubber double-sided synchronous gear (Figure DA), the tooth shape is Arranged in a cross mode is the DB type D-T10 rubber double-sided synchronous gear (Figure DB).
The belt body layer of the D-T10 rubber double-sided toothed synchronous belt is made of high-quality neoprene imported from Japan, the skeleton layer is made of high-quality glass fiber cord imported from Japan, and the tooth surface wear-resistant layer is made of nylon 66 high elastic cloth protect. D-T10 rubber double-sided toothed synchronous belt has the characteristics of good dynamic flexing, good crack resistance, excellent ozone performance, aging resistance, heat resistance, oil resistance, and abrasion resistance.
Precautions for storage, installation and use of D-T10 rubber double-sided toothed synchronous belt
1. It is strictly forbidden to excessively break or bend the D-T10 rubber double-sided toothed synchronous belt to avoid damage to the strong layer and lose its use value.
2. Do not store the D-T10 rubber double-sided toothed synchronous belt in an abnormally bent state for a long time.
3. Keep the D-T10 rubber double-sided toothed synchronous belt in a cool place.
4. When installing, please shorten the center distance, loosen the tension pulley, and do not force the belt from the lower flange of the pulley to drag and grind into it.
5. The teeth of the D-T10 rubber double-sided toothed synchronous belt must be at right angles to the direction of rotation of the synchronous belt wheel.
6. The parallelism of the main shaft of the driving wheel and the driven wheel is controlled at about tangent = 1/1000.Inaccurate shaft position directly affects the service life.
7. It is found that the D-T10 rubber double-sided gear timing belt on the driving wheel is offset to one side, and the driven wheel should be moved to adjust it, and the pressure of the tensioning wheel should be adjusted.
8. When starting, the center distance changes, the D-T10 rubber double-sided toothed synchronous belt is loose, and the phenomenon of tooth skipping occurs. Check whether the pulley frame is loose and whether the shaft positioning is inaccurate.To be adjusted and reinforced.
9. D-T10 rubber double-sided toothed synchronous belt must be properly tensioned according to different models and bandwidths when installing.
10. The tensioning wheel must be installed on the loose side of the driven transmission.
| specification | Knot line length | Number of teeth | specification | Knot line length | Number of teeth | specification | Knot line length | Number of teeth |
| D-T10×500 | 500.00 | 50 | D-T10×1080 | 1080.00 | 108 | D-T10×2020 | 2020.00 | 202 |
| D-T10×530 | 530.00 | 53 | D-T10×1100 | 1100.00 | 110 | D-T10×2100 | 2100.00 | 210 |
| D-T10×550 | 550.00 | 55 | D-T10×1140 | 1140.00 | 114 | D-T10×2200 | 2200.00 | 220 |
| D-T10×560 | 560.00 | 56 | D-T10×1150 | 1150.00 | 115 | D-T10×2250 | 2250.00 | 225 |
| D-T10×570 | 570.00 | 57 | D-T10×1200 | 1200.00 | 120 | D-T10×2300 | 2300.00 | 230 |
| D-T10×600 | 600.00 | 60 | D-T10×1210 | 1210.00 | 121 | D-T10×2360 | 2360.00 | 236 |
| D-T10×610 | 610.00 | 61 | D-T10×1240 | 1240.00 | 124 | D-T10×2380 | 2380.00 | 238 |
| D-T10×630 | 630.00 | 63 | D-T10×1250 | 1250.00 | 125 | D-T10×2480 | 2480.00 | 248 |
| D-T10×650 | 650.00 | 65 | D-T10×1280 | 1280.00 | 128 | D-T10×2500 | 2500.00 | 250 |
| D-T10×660 | 660.00 | 66 | D-T10×1300 | 1300.00 | 130 | D-T10×2550 | 2550.00 | 255 |
| D-T10×700 | 700.00 | 70 | D-T10×1320 | 1320.00 | 132 | D-T10×2580 | 2580.00 | 258 |
| D-T10×720 | 720.00 | 72 | D-T10×1350 | 1350.00 | 135 | D-T10×2800 | 2800.00 | 280 |
| D-T10×730 | 730.00 | 73 | D-T10×1390 | 1390.00 | 139 | D-T10×2880 | 2880.00 | 288 |
| D-T10×750 | 750.00 | 75 | D-T10×1400 | 1400.00 | 140 | D-T10×3000 | 3000.00 | 300 |
| D-T10×780 | 780.00 | 78 | D-T10×1420 | 1420.00 | 142 | D-T10×3300 | 3300.00 | 330 |
| D-T10×800 | 800.00 | 80 | D-T10×1440 | 1440.00 | 144 | D-T10×3500 | 3500.00 | 350 |
| D-T10×810 | 810.00 | 81 | D-T10×1450 | 1450.00 | 145 | D-T10×3600 | 3600.00 | 360 |
| D-T10×840 | 840.00 | 84 | D-T10×1460 | 1460.00 | 146 | D-T10×3680 | 3680.00 | 368 |
| D-T10×850 | 850.00 | 85 | D-T10×1500 | 1500.00 | 150 | D-T10×4280 | 4280.00 | 428 |
| D-T10×880 | 880.00 | 88 | D-T10×1560 | 1560.00 | 156 | D-T10×4680 | 4680.00 | 468 |
| D-T10×890 | 890.00 | 89 | D-T10×1600 | 1600.00 | 160 | D-T10×5060 | 5060.00 | 506 |
| D-T10×900 | 900.00 | 90 | D-T10×1610 | 1610.00 | 161 | D-T10×5360 | 5360.00 | 536 |
| D-T10×910 | 910.00 | 91 | D-T10×1640 | 1640.00 | 164 | |||
| D-T10×920 | 920.00 | 92 | D-T10×1700 | 1700.00 | 170 | |||
| D-T10×950 | 950.00 | 95 | D-T10×1720 | 1720.00 | 172 | |||
| D-T10×960 | 960.00 | 96 | D-T10×1750 | 1750.00 | 175 | |||
| D-T10×980 | 980.00 | 98 | D-T10×1780 | 1780.00 | 178 | |||
| D-T10×1000 | 1000.00 | 100 | D-T10×1800 | 1800.00 | 180 | |||
| D-T10×1010 | 1010.00 | 101 | D-T10×1860 | 1860.00 | 186 | |||
| D-T10×1040 | 1040.00 | 104 | D-T10×1880 | 1880.00 | 188 | |||
| D-T10×1050 | 1050.00 | 105 | D-T10×1980 | 1980.00 | 198 |
