Design parameters of T2.5 rubber single tooth synchronous belt:
The tooth profile is a metric trapezoidal tooth, also known as a special square tooth, which belongs to the lightest transmission design.
Standard design reference value: pitch: 2.5mm; tooth height: 0.7mm; belt thickness: 1.3mm; angle: 40 degrees
General specifications of T2.5 rubber single tooth synchronous belt:
(2.5) TXNUMX rubber single tooth timing belt raw materials: glass fiber reinforced polyester material, neoprene rubber, nylon high elastic cloth
(2.5) T36 rubber single tooth synchronous belt load capacity: 205.6n/mm (XNUMXlbf/in)
(2.5) Breaking strength of T46 rubber single tooth synchronous belt: >=262.7n/mm(XNUMXlbf/in)
(Four) T2.5 rubber single tooth synchronous belt operating temperature range: -40 degrees-120 degrees
Tooth profile pitch of T2.5 rubber single tooth synchronous belt:
6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 32mm, 50mm
The width of T2.5 rubber single tooth synchronous belt can be made according to customer requirements.
T2.5 rubber single tooth synchronous belt design features and advantages:
The T2.5 rubber single-sided toothed synchronous belt is flexibly connected to the motor and the motor, and has the following functions during movement:
1. The T2.5 rubber single tooth synchronous belt runs stably, avoiding the slip of the vibration belt.
2. T2.5 rubber single-sided tooth synchronous belts have higher mechanical efficiency: effectively reduce friction and temperature, thereby increasing the use time of the belt.
3. T2.5 rubber single tooth synchronous belt has strong load capacity
4. T2.5 rubber single-sided tooth timing belt is noise-free and does not require maintenance
5. T2.5 rubber single-sided tooth timing belt is resistant to ozone and ultraviolet rays.
6. T2.5 rubber single-sided tooth timing belt has a good prediction of resistance to oil, grease and gasoline.
7. T2.5 rubber single-sided tooth synchronous belts are acid-resistant and cleaning products according to special conditions.
T2.5 rubber single tooth synchronous belt identification:
Three parts: indicates the length, spacing and width of the belt to bring back the part number.As shown below.This T2.5 rubber single tooth synchronous belt model has a pitch line length of 160mm and a width of 6mm.